This is an old revision of the document!

---

Overtime Contingency Protocol

Steps 1 through 13 are to be executed by USER A only. During this time, USER B should support USER A in completing the steps by verifying sequence of keystrokes and program interface selections.

Step 1: Locate the CHIP CONTROL terminal and engage TRACKBALL to awaken screen. Step 2: ENTER the following SHIFT+CTRL+ALT on keyboard to activate SYSTEM COMMAND WINDOW. Step 3: ENTER the following: SHIFT+C+I+CTRL+ENTER into field to proceed to SYSTEM FUNCTION WINDOW. Step 4: Continuing to hold SHIFT, scroll to SELECT MANAGE MODE from drop-down menu and CONTINUE. WALL DISPLAY names will illuminate to SALMON. Step 5: Rotate the FUNCTIONS switch and SWITCH it to the MANAGE position. Step 6: ENTER desired name into JUMP TO field to search for CHIP DISPLAY. Enter ENTER and select file from right-hand MENU. Step 7: An ALT SEARCH OPTIONS WINDOW will appear. To engage multiple CHIP DISPLAYS, scroll TRACKBALL to select additional desired names. CONFIRM when finished. Step 8: When all CHIP DISPLAYS are engaged, a CONFIRM LIST WINDOW will appear alongside a :20 COUNTDOWN. If countdown elapses, system resets. Step 9: If [?] is correct, SELECT YES. This will open an OPEN CIRCUIT WINDOW and reset the COUNTER at :20. If countdown elapses, system will reset. Step 10: Illegible Step 11: Return to Chip Control Terminal and ENTER Shift-Ctrl-Alt to open SYSTEM COMMAND WINDOW. Steps 12-13: Illegible

Steps 14-17 NOTE: Read thoroughly before proceeding. Steps 14-17 of the OVERTIME CONTINGENCY PROTOCOL must be performed by USER A and USER B simultaneously. During this time, USER A should verbally direct USER B to ensure proper timing of the protocol sequence.

Step 14: [?] and FLIP OVERRIDE LEVER SWITCH A to ON [while] holding in place. Verbally instruct USER B to do the same with OVERRIDE LEVER SWITCH B. Step 15: USER B: Wait for verbal instructions from USER A. When instructed to by USER A, FLIP LEVER SWITCH B to ON position, holding in place. Step 16: Alongside USER A, continue to [?] LEVER SWITCHES A and B in [tandem for the duration, holding in place] Step 17: Illegible

Figure 13-A: OVERRIDE A Lever Figure 13-B: OVERRIDE B lever Steps 14-17 NOTE: Read thoroughly before proceeding.