Overtime Contingency Protocol

OVERTIME CONTINGENCY PROTOCOL TWO USERS REQUIRED

The following procedure should only be performed under circumstances authorized by a supervisor, and must be executed by two operators. If you have not received authorization to perform this Overtime Contingency Protocol, return this Quick Reference Guide to its original location immediately.

STEPS 1–13 NOTE: Read thoroughly before beginning.

Steps 1 through 13 of the Overtime Contingency Protocol are to be executed by User A only. During this time, USER B should support USER A in completing these steps by verifying sequence of keystrokes and program interface selections. Following execution of this protocol, USER B should ensure Chip Command terminal is left tidy for future users.

STEP 1 Locate the Chip Control terminal and engage TRACKBALL to awaken screen.

STEP 2 ENTER the following: SHIFT + CTRL + ALT on keyboard to activate SYSTEM COMMAND WINDOW.

STEP 3 ENTER the following: SHIFT + C + 1 + CTRL + ENTER into field to proceed to SYSTEM FUNCTION WINDOW.

STEP 4 Continuing to hold SHIFT, scroll to SELECT MANAGE MODE from drop-down menu and CONFIRM. WALL DISPLAY names will illuminate to SALMON.

STEP 5 Rotate the FUNCTIONS switch and SWITCH it to the MANAGE position.

STEP 6 ENTER desired name into JUMP TO field to search for CHIP DISPLAY. Enter ENTER and select file from right-hand MENU.

STEP 7 An ALT SEARCH OPTIONS WINDOW will appear. To engage multiple CHIP DISPLAYS, scroll TRACKBALL to select additional desired names. CONFIRM when finished.

STEP 8 When all CHIP DISPLAYS are engaged, a CONFIRM LIST WINDOW will appear alongside a :20 COUNTDOWN. (If countdown elapses, system will reset)

STEP 9 If list is correct, SELECT YES. This will open an OPEN CIRCUIT WINDOW and reset the COUNTER at :20. (If countdown elapses, system will reset.)

STEP 10 [Illegible]

STEP 11 Return to Chip Control terminal and ENTER: SHIFT + CTRL + ALT to open SYSTEM COMMAND WINDOW.

STEP 12 ENTER the following: SHIFT + C + 2 + CTRL + ENTER into field to proceed to CONTINGENCY OPTION WINDOW.

STEP 13 Continuing to hold SHIFT, scroll to SELECT OVERTIME from list. Hit ENTER to initiate and ENGAGE OVERTIME WINDOW and :20 COUNTDOWN. (If COUNTDOWN elapses, system will reset.)

STEPS 14–17 NOTE: Read thoroughly before proceeding.

Steps 14 through 17 of the Overtime Contingency Protocol are to be executed by USER A and USER B simultaneously. During this time, USER A should verbally direct USER B in completing these steps to ensure proper timing of the protocol sequence.

USER A

STEP 14 Locate and FLIP OVERRIDE LEVER SWITCH A to ON position, holding in place. Then instruct USER B to do the same with OVERRIDE LEVER B.

Figure 13A Override A Lever

STEP 16 Alongside USER B, continue to HOLD OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).

STEP 17 To conclude Overtime Contingency, RELEASE OVERRIDE LEVER SWITCH A and verbally direct USER B to release OVERRIDE LEVER SWITCH B.

USER B

Wait for verbal instructions from USER A.

STEP 15 When instructed to do so by USER A, FLIP OVERRIDE LEVER SWITCH B to ON position, holding in place.

Figure 14A Override B Lever

STEP 16 Alongside USER A, continue to HOLD OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).

STEP 17 Wait for verbal instruction from USER A. When given the cue, RELEASE OVERRIDE LEVER SWITCHES B.