Differences

This shows you the differences between two versions of the page.

--- overtime_contingency_protocol [2022-05-09 03:30] – Neatnik
+++ overtime_contingency_protocol [2022-07-25 21:27] (current) – Saeid
@@ Line 1: / Line 1: @@
 ====== Overtime Contingency Protocol ======
-<WRAP figure left>
+<WRAP figure right>
-{{overtime-contingency-protocol.png?300|Overtime Contingency Protocol page}}
+{{overtime-contingency-protocol.png?1200x800|Overtime Contingency Protocol page}}
 The Overtime Contingency Protocol page just prior to [[Helena Eagan|Helly]] ripping it from the binder
 </WRAP>
-The **Overtime Contingency Protocol** is a [[severance chip]] control protocol documented in the [[Security Operations Protocol Quick Start Guides]] binder stored in the [[Lumon Industries]] [[SVR'd floor]] [[security office]].
+The **Overtime Contingency Protocol** is a [[Severance chip]] control protocol documented in the [[Security Office Protocol Quick Start Guides]] binder stored in the [[Lumon Industries]] [[Severed Floor]] [[Security Office]].
+{{INLINETOC width18 2}}
 ===== Protocol =====
-Steps 1 through 13 are to be executed by USER A only. During this time, USER B should support USER A in completing the steps by verifying sequence of keystrokes and program interface selections.
+<WRAP script inset>
+OVERTIME CONTINGENCY PROTOCOL
+TWO USERS REQUIRED
+The following procedure should only be performed under circumstances authorized by a supervisor, and must be executed by two operators. If you have not received authorization to perform this Overtime Contingency Protocol, return this Quick Reference Guide to its original location immediately.
+**STEPS 1–13**
+**NOTE:** Read thoroughly before beginning.
+Steps 1 through 13 of the Overtime Contingency Protocol are to be executed by User A only.
+During this time, USER B should support USER A in completing these steps by verifying sequence of keystrokes and program interface selections.
+Following execution of this protocol, USER B should ensure Chip Command terminal is left tidy for future users.
+**STEP 1**
+Locate the Chip Control terminal and engage __**TRACKBALL**__ to awaken screen.
+**STEP 2**
+__**ENTER**__ the following: SHIFT + CTRL + ALT on keyboard to activate SYSTEM COMMAND WINDOW.
+**STEP 3**
+__**ENTER**__ the following: SHIFT + C + 1 + CTRL + ENTER into field to proceed to SYSTEM FUNCTION WINDOW.
+**STEP 4**
+Continuing to hold SHIFT, scroll to __**SELECT**__ MANAGE MODE from drop-down menu and CONFIRM. WALL DISPLAY names will illuminate to SALMON.
+**STEP 5**
+Rotate the FUNCTIONS switch and SWITCH it to the MANAGE position.
+**STEP 6**
+ENTER desired name into JUMP TO field to search for CHIP DISPLAY. Enter ENTER and select file from right-hand MENU.
+**STEP 7**
+An ALT SEARCH OPTIONS WINDOW will appear. To engage multiple CHIP DISPLAYS, scroll __**TRACKBALL**__ to select additional desired names. CONFIRM when finished.
+**STEP 8**
+When all CHIP DISPLAYS are engaged, a CONFIRM LIST WINDOW will appear alongside a __**:20 COUNTDOWN**__. (If countdown elapses, system will reset)
+**STEP 9**
+If list is correct, __**SELECT**__ YES. This will open an OPEN CIRCUIT WINDOW and reset the COUNTER at :20. (If countdown elapses, system will reset.)
+**STEP 10**
+[Illegible]
+**STEP 11**
+Return to Chip Control terminal and __**ENTER**__: SHIFT + CTRL + ALT to open SYSTEM COMMAND WINDOW.
+**STEP 12**
+__**ENTER**__ the following: SHIFT + C + 2 + CTRL + ENTER into field to proceed to CONTINGENCY OPTION WINDOW.
+**STEP 13**
+Continuing to hold SHIFT, scroll to __**SELECT**__ OVERTIME from list. Hit ENTER to initiate and ENGAGE OVERTIME WINDOW and :20 COUNTDOWN. (If COUNTDOWN elapses, system will reset.)
+**STEPS 14–17**
+**NOTE:** Read thoroughly before proceeding.
+Steps 14 through 17 of the Overtime Contingency Protocol are to be executed by USER A and USER B simultaneously. During this time, USER A should verbally direct USER B in completing these steps to ensure proper timing of the protocol sequence.
+**USER A**
+**STEP 14**
+Locate and __**FLIP**__ OVERRIDE LEVER SWITCH A to ON position, holding in place. Then instruct USER B to do the same with **OVERRIDE LEVER B**.
+__Figure 13A__
+Override A Lever
+**STEP 16**
+Alongside USER B, continue to __**HOLD**__ OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).
+**STEP 17**
+To conclude Overtime Contingency, __**RELEASE**__ OVERRIDE LEVER SWITCH A and verbally direct USER B to release OVERRIDE LEVER SWITCH B.
+**USER B**
+Wait for verbal instructions from USER A.
+**STEP 15**
+When instructed to do so by USER A, __**FLIP**__ OVERRIDE LEVER SWITCH B to ON position, holding in place.
+__Figure 14A__
+Override B Lever
+**STEP 16**
+Alongside USER A, continue to __**HOLD**__ OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).
+**STEP 17**
+Wait for verbal instruction from USER A. When given the cue, __**RELEASE**__ OVERRIDE LEVER SWITCHES B.
+</WRAP>
+===== Gallery =====
+<WRAP gallery-container>
+<WRAP gallery-item>
+{{otc_1.png?600x400|Helly going over the protocol steps}} \\ Helly going over the protocol steps((Season 1, Episode 7, [[Defiant Jazz]] (34:49) ))
+</WRAP>
+<WRAP gallery-item>
+{{otc_2.png?600x400|Dylan holding the Overtime Contingency Protocol manual}} \\ Dylan holding the Overtime Contingency Protocol manual((Season 1, Episode 8, [[What’s for Dinner?]] (42:30) ))
+</WRAP>
+<WRAP gallery-item>
+{{otc_3.png?600x400|A depiction of the FUNCTIONS switch, as part of step five}} \\ A depiction of the FUNCTIONS switch, as part of step five((Season 1, Episode 8, [[What’s for Dinner?]] (42:57) ))
+</WRAP>
+<WRAP gallery-item>
+{{otc_4.jpg?|A page manual prop from the Severance Activation event at San Diego Comic-Con 2022}} \\ A page manual prop from the Severance Activation event at San Diego Comic-Con 2022(([[https://www.reddit.com/r/SeveranceAppleTVPlus/comments/w7v9vl/not_sure_how_these_made_it_past_the_code|Reddit]] (July 25, 2022) ))
+</WRAP>
+</WRAP>
+===== Appearances =====
-Step 1: Locate the CHIP CONTROL terminal and engage TRACKBALL to awaken screen.
+==== Season 1 ====
-Step 2: ENTER the following SHIFT+CTRL+ALT on keyboard to activate SYSTEM COMMAND WINDOW.
-Step 3: ENTER the following: SHIFT+C+I+CTRL+ENTER into field to proceed to SYSTEM FUNCTION WINDOW.
-Step 4: Continuing to hold SHIFT, scroll to SELECT MANAGE MODE from drop-down menu and CONTINUE. WALL DISPLAY names will illuminate to SALMON.
-Step 5: Rotate the FUNCTIONS switch and SWITCH it to the MANAGE position.
-Step 6: ENTER desired name into JUMP TO field to search for CHIP DISPLAY. Enter ENTER and select file from right-hand MENU.
-Step 7: An ALT SEARCH OPTIONS WINDOW will appear. To engage multiple CHIP DISPLAYS, scroll TRACKBALL to select additional desired names. CONFIRM when finished.
-Step 8: When all CHIP DISPLAYS are engaged, a CONFIRM LIST WINDOW will appear alongside a :20 COUNTDOWN. If countdown elapses, system resets.
-Step 9: If [?] is correct, SELECT YES. This will open an OPEN CIRCUIT WINDOW and reset the COUNTER at :20. If countdown elapses, system will reset.
-Step 10: Illegible
-Step 11: Return to Chip Control Terminal and ENTER Shift-Ctrl-Alt to open SYSTEM COMMAND WINDOW.
-Steps 12-13: Illegible
-Steps 14-17 NOTE: Read thoroughly before proceeding.
+<html><ol class="manually-numbered">
-Steps 14-17 of the OVERTIME CONTINGENCY PROTOCOL must be performed by USER A and USER B simultaneously. During this time, USER A should verbally direct USER B to ensure proper timing of the protocol sequence.
+  <li value="6"></html>[[Hide and Seek]]<html></li>
+  <li value="7"></html>[[Defiant Jazz]]<html></li>
+  <li value="8"></html>[[What’s for Dinner?]]<html></li>
+  <li value="9"></html>[[The We We Are]]<html></li>
+</ol></html>
-Step 14: [?] and FLIP OVERRIDE LEVER SWITCH A to ON [while] holding in place. Verbally instruct USER B to do the same with OVERRIDE LEVER SWITCH B.
+===== See Also =====
-Step 15: USER B: Wait for verbal instructions from USER A. When instructed to by USER A, FLIP LEVER SWITCH B to ON position, holding in place.
-Step 16: Alongside USER A, continue to [?] LEVER SWITCHES A and B in [tandem for the duration, holding in place]
-Step 17: Illegible
-Figure 13-A: OVERRIDE A Lever
+  * [[Elephant Access Circuit]]
-Figure 13-B: OVERRIDE B lever
+  * [[Branch Transfer System]]
-Steps 14-17 NOTE: Read thoroughly before proceeding.
+{{tag>Concepts Procedures}}

User Tools

Site Tools

Differences

Page Tools