====== Overtime Contingency Protocol ======

<WRAP figure right>
{{overtime-contingency-protocol.webp?1200x800|Overtime Contingency Protocol page}}
The Overtime Contingency Protocol page just prior to [[Helena Eagan|Helly]] ripping it from the binder
</WRAP>

The **Overtime Contingency Protocol** is a [[Severance chip]] control protocol documented in the [[Security Office Protocol Quick Start Guides]] binder stored in the [[Lumon Industries]] [[Severed Floor]] [[Security Office]].

{{INLINETOC width18 2}}

===== Protocol =====

<WRAP script inset>

OVERTIME CONTINGENCY PROTOCOL
TWO USERS REQUIRED

The following procedure should only be performed under circumstances authorized by a supervisor, and must be executed by two operators. If you have not received authorization to perform this Overtime Contingency Protocol, return this Quick Reference Guide to its original location immediately.

**STEPS 1–13**
**NOTE:** Read thoroughly before beginning.

Steps 1 through 13 of the Overtime Contingency Protocol are to be executed by User A only.
During this time, USER B should support USER A in completing these steps by verifying sequence of keystrokes and program interface selections.
Following execution of this protocol, USER B should ensure Chip Command terminal is left tidy for future users.

**STEP 1**
Locate the Chip Control terminal and engage __**TRACKBALL**__ to awaken screen.

**STEP 2**
__**ENTER**__ the following: SHIFT + CTRL + ALT on keyboard to activate SYSTEM COMMAND WINDOW.

**STEP 3**
__**ENTER**__ the following: SHIFT + C + 1 + CTRL + ENTER into field to proceed to SYSTEM FUNCTION WINDOW.

**STEP 4**
Continuing to hold SHIFT, scroll to __**SELECT**__ MANAGE MODE from drop-down menu and CONFIRM. WALL DISPLAY names will illuminate to SALMON.

**STEP 5**
Rotate the FUNCTIONS switch and SWITCH it to the MANAGE position.

**STEP 6**
ENTER desired name into JUMP TO field to search for CHIP DISPLAY. Enter ENTER and select file from right-hand MENU.

**STEP 7**
An ALT SEARCH OPTIONS WINDOW will appear. To engage multiple CHIP DISPLAYS, scroll __**TRACKBALL**__ to select additional desired names. CONFIRM when finished.

**STEP 8**
When all CHIP DISPLAYS are engaged, a CONFIRM LIST WINDOW will appear alongside a __**:20 COUNTDOWN**__. (If countdown elapses, system will reset)

**STEP 9**
If list is correct, __**SELECT**__ YES. This will open an OPEN CIRCUIT WINDOW and reset the COUNTER at :20. (If countdown elapses, system will reset.)

**STEP 10**
[Illegible]

**STEP 11**
Return to Chip Control terminal and __**ENTER**__: SHIFT + CTRL + ALT to open SYSTEM COMMAND WINDOW.

**STEP 12**
__**ENTER**__ the following: SHIFT + C + 2 + CTRL + ENTER into field to proceed to CONTINGENCY OPTION WINDOW.

**STEP 13**
Continuing to hold SHIFT, scroll to __**SELECT**__ OVERTIME from list. Hit ENTER to initiate and ENGAGE OVERTIME WINDOW and :20 COUNTDOWN. (If COUNTDOWN elapses, system will reset.)

**STEPS 14–17**
**NOTE:** Read thoroughly before proceeding.

Steps 14 through 17 of the Overtime Contingency Protocol are to be executed by USER A and USER B simultaneously. During this time, USER A should verbally direct USER B in completing these steps to ensure proper timing of the protocol sequence.

**USER A**

**STEP 14**
Locate and __**FLIP**__ OVERRIDE LEVER SWITCH A to ON position, holding in place. Then instruct USER B to do the same with **OVERRIDE LEVER B**.

__Figure 13A__
Override A Lever

**STEP 16**
Alongside USER B, continue to __**HOLD**__ OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).

**STEP 17**
To conclude Overtime Contingency, __**RELEASE**__ OVERRIDE LEVER SWITCH A and verbally direct USER B to release OVERRIDE LEVER SWITCH B.

**USER B**

Wait for verbal instructions from USER A.

**STEP 15**
When instructed to do so by USER A, __**FLIP**__ OVERRIDE LEVER SWITCH B to ON position, holding in place.

__Figure 14A__
Override B Lever

**STEP 16**
Alongside USER A, continue to __**HOLD**__ OVERRIDE LEVER SWITCHES A and B in place for desired duration of Overtime Contingency (NOT TO EXCEED 90 MINUTES).

**STEP 17**
Wait for verbal instruction from USER A. When given the cue, __**RELEASE**__ OVERRIDE LEVER SWITCHES B.

</WRAP>

===== Gallery =====

<WRAP gallery-container>

<WRAP gallery-item>
{{otc_1.webp?600x400|Helly going over the protocol steps}} \\ Helly going over the protocol steps((Season 1, Episode 7, [[Defiant Jazz]] (34:49) ))
</WRAP>

<WRAP gallery-item>
{{otc_2.webp?600x400|Dylan holding the Overtime Contingency Protocol manual}} \\ Dylan holding the Overtime Contingency Protocol manual((Season 1, Episode 8, [[What’s for Dinner?]] (42:30) ))
</WRAP>

<WRAP gallery-item>
{{otc_3.webp?600x400|A depiction of the FUNCTIONS switch, as part of step five}} \\ A depiction of the FUNCTIONS switch, as part of step five((Season 1, Episode 8, [[What’s for Dinner?]] (42:57) ))
</WRAP>

<WRAP gallery-item>
{{otc_4.webp?|A page manual prop from the Severance Activation event at San Diego Comic-Con 2022}} \\ A page manual prop from the Severance Activation event at San Diego Comic-Con 2022(([[https://www.reddit.com/r/SeveranceAppleTVPlus/comments/w7v9vl/not_sure_how_these_made_it_past_the_code|Reddit]] (July 25, 2022) ))
</WRAP>

</WRAP>

===== Appearances =====

==== Season 1 ====

<html><ol class="manually-numbered">
  <li value="6"></html>[[Hide and Seek]]<html></li>
  <li value="7"></html>[[Defiant Jazz]]<html></li>
  <li value="8"></html>[[What’s for Dinner?]]<html></li>
  <li value="9"></html>[[The We We Are]]<html></li>
</ol></html>

===== See Also =====

  * [[Elephant Access Circuit]]
  * [[Branch Transfer System]]

{{tag>Concepts Procedures}}